Water Softening Hose Pump

Peristaltic pump replacement improves Swiss airport’s water treatment system

Verderflex, a manufacturer of peristaltic hose and tube pumps, recently provided a cost-effective solution to a Swiss airport that had been experiencing significant problems with its water softening treatment. The local water supply required treatment to prevent scaling in the pipework.

The Challenge

The existing treatment system required a salt solution to be dosed from a storage tank close to the pumps over a 350-m pipe-run to the water supply. The piping system had a series of valves ...

Continue Reading →
Verderflex Lime Slurry Pump

Verderflex Hose Pumps For Transferring Lime Slurry

Verderflex hose pumps have been used transfer lime slurry from below storage tanks to tanker trucks

Slurry has a high specific gravity giving the solids or particles a tendency to settle when it is left for extended periods of time. Air is injected to ensure the lime and other particles remain in suspension prior to pumping. The slurry is very abrasive and the pump must withstand this and have the ability to run dry

The Verderflex VF65 hose pump has ...

Continue Reading →
KGO at CIM 2015

Canada Institute of Mining Convention 2015

CIM 2015 | Palais des Congrès | Montreal Quebec | May 10-12, 2015
Trade shows are still an important part of doing business in Canada and North America, contrary to what some say and believe. It’s about the attitude you carry, are you there because you want to be or do you believe in the old adage “you are conspicuous by your absence”? For me it is one of the best forms of marketing available, you get to meet, face ...

Continue Reading →
Custom Liquid Emulsion Polymer System

Custom Liquid Emulsion Polymer System

KGO is shipping a custom designed, packaged, Liquid Emulsion Polymer System to a local water treatment plant. This unit is our basic model with a low polymer thermal failsafe device, VFD for polymer flow control, back flow preventer, check valves, injection quill, and a TripKO Progressive Cavity pump.

Frame construction is 304 SS, all piping is welded 316 SS, with sanitary connections and tube fittings where required. The emulsion polymer storage consists of a 316 SS mother tote (1.5 times storage ...

Continue Reading →
Roto RM Mining Pumps

Roto Mining Pumps

Roto MR/RM are based on classical design retaining its compact and robust construction. These pumps have combined bearing and pump housing and incorporate hollow shaft which accommodates the coupling rod, thereby reducing overall length of the pump. Standard sealing arrangement is in gland packing; however these pumps can also be supplied with mechanical seals.

These pumps are available in both free molded and molded to metal stator designs. The maximum pressure for Free Molded pump is up to 9 Bar and ...

Continue Reading →
Verderflex Slurry Pump for Mining

Heavy duty slurry pumps for the mine

Verderflex peristaltic pumps are the first choice for mines around the world, offering unrivalled performance in a tough and uncompromising environment.

Abrasive mining slurries have sub-micron solid contents in excess of 80% with slurry SGs in excess of 2.0. Only hose pumps can pump such dense fluids whilst maintaining high levels of plant availability unlike centrifugal pumps which suffer from continuous downtime and are unable to pump such high SG slurries, lower plant performance

Additionally, reversible hose pumps can be used ...

Continue Reading →
Translate »