Wangen- Hygienic Pump Line

The hygienic-related design of the WANGEN HYLINE was implemented according to the strict GMP (Good Manufacturing Practice) directives. Hygienic Highlight: The flexible and maintenance-free joint is coated with elastomer. A constant shaft diameter construction design prevents sedimentation of the media to be pumped.

In order to enable the conveyance of a wide spectrum of media, a large selection of single-acting and double-acting shaft seals are available for the HYLINE, such as the encapsulated seals, single acting seal with elastomer bellows or gland packing. The intelligent design of this hygienic pump requires no additional seals in the product chamber. Pump disassembly is easily carried out by removing all pump component connections outside the product chamber.

Type KB-SL Hygienic




Performance Data

  • Flowrate 0 – 147 mᶟ/h
  • Pressure to 48 bar
  • Viscosity up to 200,000 cps

Suitable For:

  • Food Processing
  • Juices
  • Meats
  • Dairy
  • Fruit
  • Breweries
  • Wineries
  • Oils
  • Sauces
  • CIP (Cleaning in Place)
  • Encapsulated mechanical seal, single or double acting, rinsed by the product
  • Driven by helical geared motor
  • Easy cleaning thanks to construction with little dead space
  • Materials with FDA certificate on request
  • Discharge flange with self-emptying design
  • Surfaces of the parts in contact with the product: Ra < 0,8 μm
  • Flexible drive selection
  • Ground, electropolished surfaces
  • Maintenance-free mechanical seal independent of the sense of rotation
  • Large variety of flange connections
  • Various geometries and pump sizes
  • Sturdy block housing for various gear flange fittings
  • Various rotor/stator geometries (S, L and H geometry)

Type KL-SL Hygienic




Performance Data

  • Flowrate 0 – 259 mᶟ/h
  • Pressure up to 48 bar
  • Viscosity up to 200,000 cps

Suitable For:

  • Food Processing
  • Juices
  • Meats
  • Dairy
  • Fruit
  • Breweries
  • Wineries
  • Oils
  • Sauces
  • Flexible drive selection (helical geared motors, hydraulic motors)
  • Maintenance-free mechanical seal independent of the sense of rotation
  • Various rotor/stator geometries (S, L and H geometry)
  • Various geometries and pump sizes
  • Stator with S-cone inlet for optimum filling of the pumping chamber
  • Robust bearing pedestal with close-coupled drive and self-centering of the drive
  • Robust bearing pedestal for high force transduction
  • Surfaces of the parts in contact with the product: Ra < 0,8 μm
  • Materials with FDA certificate on request
  • Easy cleaning thanks to construction with little dead space
  • Ground, electropolished surfaces
  • Encapsulated mechanical seal, single or double acting, rinsed by the product
  • Flexible drive selection
  • Discharge flange with self-emptying design
  • Double, maintenance-free bearing
  • Service-proven sealing systems
  • CIP (Cleaning in Place)
  • Driven by helical geared motor

Type KL-RL Hygienic




Performance Data

  • See Data Sheet

Suitable For:

  • Food Processing
  • Juices
  • Meats
  • Dairy
  • Fruit
  • Breweries
  • Wineries
  • Oils
  • Sauces
  • Fully developed, robust universal joint with pre-feeding screw
  • Maintenance-free mechanical seal independent of the sense of rotation
  • Various rotor/stator geometries (S, L and H geometry)
  • Stator with S-cone inlet for optimum filling of the pumping chamber
  • Stator with S-cone inlet for optimum filling of the pumping chamber
  • Specially designed joints
  • Robust cardan joint
  • Robust bearing pedestal for high force transduction
  • Inspection port
  • Materials with FDA certificate on request
  • Surfaces of the parts in contact with the product: Ra < 0,8 μm
  • Easy cleaning thanks to construction with little dead space
  • Encapsulated mechanical seal, single or double acting, rinsed by the product
  • Enlargement possible with add-on funnel
  • Flexible drive selection
  • Discharge flange with self-emptying design
  • Double, maintenance-free bearing
  • CIP (Cleaning in Place)
  • Driven by helical geared motor

Type KL-RF Hygienic




Performance Data

  • See Data Sheet

Suitable For:

  • Food Processing
  • Juices
  • Meats
  • Dairy
  • Fruit
  • Breweries
  • Wineries
  • Oils
  • Sauces
  • Inspection port
  • Service-proven sealing systems
  • Maintenance-free mechanical seal independent of the sense of rotation
  • Various rotor/stator geometries (S, L and H geometry)
  • Stator with S-cone inlet for optimum filling of the pumping chamber
  • Easy cleaning thanks to construction with little dead space
  • Encapsulated mechanical seal, single or double acting, rinsed by the product
  • Materials with FDA certificate on request
  • Special feed unit versions possible
  • Enlargement possible with add-on funnel
  • Discharge flange with self-emptying design
  • CIP (Cleaning in Place)
  • Robust bearing pedestal for high force transduction
  • Robust bearing pedestal with close-coupled drive and self-centering of the drive
  • Driven by helical geared motor
  • Specially designed joints 

Type HYLINE




Performance Data

  • Flowrate up to 7 mᶟ/h
  • Pressure up to 20 bar
  • Temperature Range -30ᵒ C – 140ᵒ C
  • Viscosity up to 100,000 cps

Suitable For:

  • Food Processing
  • Juices
  • Meats
  • Dairy
  • Fruit
  • Breweries
  • Wineries
  • Oils
  • Sauces
  • Flexible joint, coated with elastomer and maintenance free
  • External cut surfaces