Wangen – Self Priming Pump Line

 


Type WANGEN KB10S / KB22SType KB10S / KB22S

Performance Data:

  • Flowrate 0.5 – 4 l/h – 0.002-17.6 gpm
  • Pressure Rating 16 bar/232 psi

The WANGEN KB10S / KB22S has been developed especially for polymer and chemical dosing with high repeatable accuracy.

Benefits and Characteristics

  • Housing available in SS, plastic, or cast iron
  • Flexible joint without oil filling (prevents contamination of the media)
  • Large dosing range
  • Dosing accuracy ± 1%

Technical Details

  • Long-lasting, wear- and maintenance-free flexible joint

Suitable For

Municipal and Industrial Waste Water, flocculants, sewage sludge, mining, paper & pulp.

 


Wangen Type KB-S GGType KB-S 

Performance Data

  • Flow Rate – 5 mᶟ/h – Pressure to 16 bar

Benefits and Characteristics

  • Low Life Cycle Costs
  • High pressure performance
  • Maintenance- friendly
  • Optional seal packages, cartridge type, mechanical seals & packing
  • Excellent dosing capabilities
  • Compact design
  • High suction lift (self-priming)

Suitable For

Municipal and Industrial Waste Water, flocculants, sewage sludge, mining, paper & pulp.

Technical Details

  • Large variety of flange connections
  • Stator with S-cone inlet for optimum filling of the pumping chamber
  • various rotor/stator geometries (S, L and H geometry)
  • Mature, robust universal joints with extended service life; non-clogging; with or without pre-feeding screw
  • Various mechanical seals as standard versions
  • Sturdy block housing for various gear flange fittings
  • flexible drive selection
  • Hollow rotors for smooth running
  • Driven by PTO or drive shaft with feather key
  • Double bearing arrangement with tapered roller bearings
  • Robust bearing pedestal for high force transduction

Wangen Type KL-SType KL-S

Performance Data

  • Flowrate 0-560 mᶟ/hr
  • Pressure to 48 bar
  • Viscosity to 200,000 cps

Benefits and Characteristics

  • Large viscosity range
  • Good pumping performance even against high pressure
  • High operational reliability
  • Consistent diameters at joint connections for constant flow rates
  • Rigorous modular principle for high flexibility, low stocking of spare parts, short downtimes for maintenance and repairs
  • Optimum service life
  • Excellent pumping performance with abrasive and fibrous materials
  • High suction lift (self-priming)
  • Constant flow speed in the suction housing prevents deposits or sedimentation
  • Low-pulsation, continuous conveyance independent of pressure and viscosity
  • Easy to maintain due to large cleaning ports

Suitable For

Activated carbon, slurries, bentonite, flocculants/polymers, sewage sludge, paper pulp,  agriculture waste, coal flotation slurry.

Technical Details

  • Mature, robust universal joints with extended service life; non-clogging; with or without pre-feeding screw
  • Fully developed, robust universal joint with or without pre-feeding screw
  • Flexible drive selection (helical geared motors, hydraulic motors)
  • Suction housing with large inspection and cleaning openings
  • large variety of flange connections
  • Available seal types: Stuffing box, mechanical seal, LWD mechanical face seal, lip seals, with and without rinsing or buffer fluid
  • Robust bearing pedestal with close-coupled drive and self-centering of the drive
  • Stator with S-cone inlet for optimum filling of the pumping chamber
  • Various rotor/stator geometries (S, L and H geometry)

 


Type WANGEN Xpress

Performance Data

  • Flowrate up to 56 mᶟ/h / 246 gpm
  • Pressure up to 6 bar / 87 psiType WANGEN Xpress

Unique Design – The Xpress pump range has been specially developed for easy maintenance and to considerably shorten the servicing time and thus reduce costs. Reliable pumping of media, along with fast rotor/stator changes are ensured by the X-LIFT quick change system developed by WANGEN.

Benefits and Characteristics

  • The pump remains in the system when changing rotor/stator, thus considerably reducing the amount of installation work
  • Changing the complete drive section of the WANGEN Xpress can be carried out using 4 standard tools, quickly and easily
  • Quick change of shaft seal
  • Excellent price/performance ratio
  • Low Life Cycle Costs
  • Low servicing costs

Suitable For

Bentonite, flocculants, milk of lime, industrial waste water, activated sludge, flotation sludge, mining, pulp & paper industry.

Technical Details

  • Fully developed, robust universal joint
  • Service-proven sealing systems

 


Type WANGEN BIO-FEEDWangen BIO-FEED

Performance Data

  • Flowrate up to 50 mᶟ/h
  • Pressure up to 6 bar 87 psi

The WANGEN BIO-FEED pump is designed especially for applications to combine the blending of solids and liquids.

With a specially-developed milling screw, you can mix the solids that are to be added with the separately added liquid and convey to desired containers.

With our innovative X-LIFT quick-change system, the wearing parts are easy to replace. Only a few simple steps are needed, without this requiring disassembly of the pump from the piping system. Thereby, WANGEN BIO-FEED is also suitable for use in restricted spaces.

Benefits and Characteristics

  • X-LIFT quick change system
  • Large-scale mixing chamber
  • Specially-developed joint with milling screw
  • Liquid addition and high-performance central pump
  • Unproblematic liquid feeding with wet and watery solids, without additional liquid
  • Liquid feeding pump for connection to existing screw technology
  • Low Life Cycle Costs
  • The pump remains in the system when changing rotor/stator, thus considerably reducing the amount of installation work
  • fast rotor/stator changes
  • Maintenance-friendly

Suitable For

Sewage sludge, food waste, chopped corn silage, straw and grass silage, whole crop silage dry poultry waste, hackled sugar beets, food waste.

Technical Details

  • Modern sealing system (LWD mechanical face seal)
  • Fully developed, robust universal joint with pre-feeding screw
  • flexible drive selection
  • Inspection port
  • Stator with S-cone inlet for optimum filling of the pumping chamber
  • Various geometries and pump sizes

 


Wangen Type AType A PTO

Performance Data

  • Flowrate 60 – 90 mᶟ/h btw 120 – 160 mᶟ/h
  • Pressure at 6/12 bar or 6 bar

Benefits and Characteristics

  • Low Life Cycle Costs
  • High operational reliability
  • High pressure performance
  • No foreign body deposits in the suction housing
  • Rigorous modular principle for high flexibility, low stocking of spare parts, short downtimes for maintenance and repairs
  • Easy fitting to slurry tankers or trolleys
  • Smooth running; hollow rotor design
  • Maintenance-friendly
  • Easy, space-saving assembly
  • Good pumping performance against high pressure
  • High suction lift (self-priming)
  • Long service life
  • Multi-way slide valve installed in the suction housing, can be operated by hand lever

Suitable for

  • Fertilizer
  • Liquid Manure cattle & poultry

Technical Details

  • Driven by PTO shaft
  • Stator with S-cone inlet for optimum filling of the pumping chamber
  • Slide valve in suction housing pivotal for suction and delivery
  • Conical slide valve housing with adjustable tap cock
  • Reinforced cardan joint
  • Hollow rotors for smooth running
  • Double, maintenance-free bearing
  • Shaft seal (mechanical face seal with oil quench)

 


Wangen Type GL-FType GL-F

Performance Data

  • Flowrate up to 7500 l/min
  • Pressure up to 8 bar

The WANGEN processing cavity pump of type GL-F is compactly built. It can be used to achieve high conveyance volumes and pressures. Attached to tank trailers, slurry tankers and umbilical hose systems, it is equally suited for mediums with different properties, such as fluid or slow-moving, mash-like, or loaded with solids.

Benefits and Characteristics

  • No tangling of fibers around the joint or joint connections
  • Optional stone catcher
  • Pump delivery over long distances and elevation
  • Low Life Cycle Costs
  • High operational reliability
  • High priming capacity
  • Rigorous modular principle for high flexibility, low stocking of spare parts, short downtimes for maintenance and repairs
  • Low servicing costs
  • Low-pulsation, continuous conveyance independent of pressure and viscosity
  • Smooth running; hollow rotor design
  • Maintenance-friendly
  • Easy fitting to slurry tankers or trolleys
  • Compact construction based on modular principle for high flexibility
  • High suction lift (self-priming)
  • High pressure performance
  • Good pumping performance even with abrasive and fibrous materials in the media

Suitable For

Fertilizer, liquid poultry manure, cattle slurry, fermenting substrates

Technical Details

  • Stator with S-cone inlet for optimum filling of the pumping chamber
  • Various geometries and pump sizes
  • Shaft seal (mechanical face seal with oil quench)
  • Reinforced cardan joint
  • Suction housing with large inspection and cleaning openings
  • Maintenance-free mechanical seal independent of the sense of rotation
  • Hollow rotors for smooth running
  • Driven by PTO or drive shaft with feather key
  • Double bearing arrangement with tapered roller bearings
  • Robust bearing pedestal for high force transduction

 


Wangen GL-SType GL-S

Performance Data

  • Flowrate 25 – 120 mᶟ/h
  • Pressure up to 6/12/18 bar

Benefits and Characteristics

  • Low Life Cycle Costs
  • High operational reliability
  • High priming capacity
  • Long service life
  • Good pumping performance even against high pressure
  • Rigorous modular principle for high flexibility, low stocking of spare parts, short downtimes for maintenance and repairs
  • Easy fitting to slurry tankers or trolleys
  • Smooth running; hollow rotor design
  • Easy to maintain thanks to large cleaning openings
  • High pressure performance
  • High suction lift (self-priming)
  • Consistent diameters at joint connections for constant flow rates
  • No foreign body deposits in the suction housing
  • No tangling of fibers around the joint or joint connections
  • Rigorous modular principle for high flexibility
  • Optimum service life even with difficult media

Suitable For

Fertilizer, liquid poultry manure, cattle slurry, fermenting substrates

Technical Details

  • Service-proven sealing systems
  • Hollow rotors for smooth running
  • large variety of flange connections
  • Fully developed, robust universal joint
  • Suction housing with large inspection and cleaning openings
  • Various geometries and pump sizes
  • Stator with S-cone inlet for optimum filling of the pumping chamber
  • Driven by PTO or drive shaft with feather key
  • Safety and flexibility thanks to various additional features such as a pneumatic overflow unit, bypass and multi-way slide valve
  • Shaft seal (mechanical face seal with oil quench)
  • Double bearing arrangement with tapered roller bearings

 


Wangen America Literature