INTERNORMEN Cartridge Filters

Filter Housings • High quality • High Pressure Possible • For DOE and SOE filter cartridges Filter housing with clamp connection. Available for 10”, 20”, 30”, 40” cartridges.

Download Technical Information (PDF)

Material Housing ................................ SS 316 Material Clamp ................................... SS 316 Material Gasket .................. NBR, FPM, EPDM Vent (N3) .................................................. 3/8” In- / Outlet (N1+N2) ....... RP 1,5 - 5” (female), Flange DN 80 - 125 Drains (N4, N5) .................................... Rp 1/2 Available housing length...10”, 20”, 30” and 40” Surface Finish Internal: Pickled External: Mechanically polished Max. Working Pressure PS 3-8 Round: ........ 10 bar (145 psi) at 80°C (176°F) 10-29 Round: ........ 6 bar (87 psi) at 80°C (176°F)

Cartridge Dimensions the following fi lter cartridges can be used in IFHR-housings: IFHR 1 = DOE (248 to 256 mm), SOE 10” Code 3 (222 with fi n) or Code 7 (226 with fi n) IFHR 2 = DOE (496 to 508 mm), SOE 20” Code 3 (222 with fi n) or Code 7 (226 with fi n) IFHR 3 = DOE (744 to 762 mm), SOE 30” Code 3 (222 with fi n) or Code 7 (226 with fi n) IFHR 4 = DOE (1012 to 1016 mm), SOE 40” Code 3 (222 with fi n) or Code 7 (226 with fi n)

Ordering Information: (universal ordering code, not all options are available)
IFHR	N° of Cartridges	Length	In/Out	End Cap Configuration	Material	Seals
IFHR	3,5	1 = 10"	40=RP 1,5"	DOE	4 = SS 304	N = NBR
IFHR	6,7	2 = 20”	50=RP 2"	SOE Code 7	6 = SS 316	F=FPM
IFHR	8,10	3 = 30”	65=RP 2,5"	SOE Code 3	-	E = EPDM
IFHR	12,14	4 = 40”	80=Flange	-	-	-
IFHR	18,22	-	100=Flange	-	-	-
IFHR	29	-	125=Flange	-	-	-