INTERNORMEN Cartridge Filters

Thermally Bonded Bicomponent Cartridges, constructed by using only polyolefine thermally bonded bi-component fibers. Ensures very stable porosity, consistent filtration & exceptionally high tolerance to differential pressures, and at the same time able to eliminate pore size variability, filter unloading or changes in the fiber matrix. Only polyolefin thermally bonded bi-component fibers are used in the construction of the Bi-Component Filter Cartridges. The unique fiber-to-fiber bond forms a very stable porosity. The patented construction of the Bi-Component filter cartridge provides consistent filtration and eliminates pore size variability and media migration. The rigid construction also provides a three dimensional fiber network that offers a high tolerance to differential pressures. This unique feature also prevents changes in the fiber matrix throughout the life of the filter providing for precise filtration and eliminating filter unloading.

Download Technical Information (PDF)

Construction Materials: Filtration Media ......................... Polyolefin End Caps ............................ Polypropylene O-rings/Gaskets .... Silicone, EPDM, Buna, Viton, Teflon Encapsulated Viton, Polyfoam Sanitisation/Sterilisation: Filtered Hot Water .............................. 90°C Autoclave: 127°C, 30min, multiple cycles In-line Steam: 135°C, 30min, multiple cycles Chemical Sanitization: Industry standard concentrations of hydrogen peroxide, peracetic acid, sodium hypochlorite & other selected chemicals.

Dimensions: Length: 9.75 to 40 inches (24.8 to 101.6 cm) nominal Outside Diameter: 2.60 inches (6.6.0 cm) nominal Inside Diameter: 1,1" Maximum Recommended Operating Conditions: Differential Pressure ................. ∆P 5,5bar Temperature ..................................... 80°C FDA Listed Materials: Manufactured from materials, which are listed for food contact applications in Title 21 of the U.S. Code.

Ordering Information: (universal ordering code, not all options are available)
TBB	Pore Size	Length	End Cap Code	O-Rings/Gaskets
TBB	1 = 1μm (A)	1 = 10"	Blank = None	Blank = None
TBB	3 = 3μm (B)	2 = 20”	1 = DOE w/ Gaskets	1 = Silicone
TBB	5 = 5μm (C)	3 = 30”	2 = SOE -222 O-rings with Flat Cap	2 = EPDM
TBB	10 = 10μm (E)	4 = 40”	3 = SOE -222 O-rings with Fin	3 = Buna
TBB	25 = 25μm (G)	5 = 9.75"	4 = SOE -222 O-rings with Spring	4 = Viton
TBB	50 = 50μm (L)	6 = 9.875"	5 = SOE -226 O-rings with Spring	5 = Teflon Encaps. Viton
TBB	75 = 75μm (Q)	7 = 19.5"	6 = SOE -226 O-rings with Flat Cap	6 = Polyfoam
TBB	100 = 100μm (V)	8 = 29.25"	7 = SOE -226 O-rings with Fin	-
TBB	150 = 150μm (W)	9 = 29.5"	8 = SOE with Spring	-
TBB	200 = 200μm	X = 39"	9 = SOE with Core Extender	-
TBB	350 = 350μm	Y = 5"	-	-