INTERNORMEN Cartridge Filters

Polypropylene Pleated Cartridges, high purity cartridges, appropriate to be used in applications which demand absolute rated filtration, e.g. in food & beverage industries, for prefiltration, fine & plating chemicals, deionized water as well as wastewater. Pleated Polypropylene Cartridges are designed for use in most applications where absolute rated pleated filtration is needed. Designed to hold 0,6 m2 of filtration media, our High Purity PPC-Cartridge is a great value. These cartridges are constructed with 100% polypropylene materials and assembled using the latest thermal bonding equipment.

Download Technical Information (PDF)

Typical Applications: Food & Beverage Photographic Deionized Water R.O. Prefiltration	Process Water Fine Chemicals Plating Chemicals Wastewater
Construction Materials: Filtration Media .................. Polypropylene Support Media ................... Polypropylene End Caps .......................... Polypropylene Center Core ....................... Polypropylene Outer Support Cage ............ Polypropylene O-rings/Gaskets .... Silicone, EPDM, Buna, Viton, Teflon Encapsulated Viton, Polyfoam Sanitisation/Sterilisation: Filtered Hot Water ........................... 90°C Chemical Sanitisation - Industry standard concentrations of hydrogen peroxide, peracetic acid, sodium hypochlorite and other selected chemicals. Absolute Filtration Ratings: 99,9% (ßx=1000) removal efficiencies.		Dimensions: Length: 10 to 40 inches (25.4 to 101.6 cm) nominal Outside Diameter: 2.70 inches (7.0 cm) nominal Filter Area: 0,6 m2 per 10” Maximum Recommended Operating Conditions: Change Out ................ Δ P 2,4 bar Temperature ......................... 80°C Product Purity: All components FDA acceptable per 21 CFR. All polypropylene components meet the specifications for biological safety per USP Class VI-121 C for plastics.

Ordering Information: (universal ordering code, not all options are available)
PPC	Pore Size	Length	End Cap Code	O-Rings/Gaskets
PPC	0,2 = 0,2μm	1 = 10"	1 = DOE w/ Gaskets	1 = Silicone
PPC	0,45 = 0,45μm	2 = 20”	2 = SOE -222 O-rings with Flat Cap	2 = EPDM
PPC	1 = 1,0μm	3 = 30”	3 = SOE -222 O-rings with Fin	3 = Buna
PPC	2 = 2,0μm	4 = 40”	4 = SOE -222 O-rings with Spring	4 = Viton
PPC	5 = 5,0μm	Y = 5”	5 = SOE -226 O-rings with Spring	5 = Teflon Encapsulated Viton
PPC	10 = 10,0μm	-	6 = SOE -226 O-rings with Flat Cap	6 = Polyfoam End Gaskets
PPC	20 = 20,0μm	-	7 = SOE -226 O-rings with Fin	-
PPC	40 = 40,0μm	-	8 = SOE with Spring	-
PPC	-	-	9 = SOE with Core Extender	-