INTERNORMEN Cartridge Filters

PES Pleated Membrane Cartridges, ensure an extended service life, cost-effective & suitable for a variety of aqueous based fluids, e.g. for chemical filtration, deionized water systems, for general use water filtration & liquid clarification. Special designs for food & beverage applications & the electronic industry are also available. General Grade PES Cartridges are designed for general purpose use wherever a cost effective membrane filter is required. Manufactured to hold the maximum amount of filter media that can be completely and effectively utilised in a cartridge. General Grade Cartridges are manufactured from an inherently hydrophilic PES membrane. The cartridge offers excellent flow characteristics, extended service life, and broad chemical compatibility.

Download Technical Information (PDF)

Typical Applications: Deionized Water Systems General-Use Water Filtration Liquid Clarification	Recirculating Fluids Chemical Filtration
Construction Materials: Membrane .............. Polyethersulfone (PES) Support Media .................... Polypropylene End Caps ............................ Polypropylene Center Core ........................ Polypropylene Outer Support Cage ............ Polypropylene O-rings/Gaskets .... Silicone, EPDM, Buna, Viton, Teflon Encapsulated Viton, Polyfoam Sanitisation/Sterilisation: Filtered Hot Water: 90°C for 30 minutes at a maximum of 1 bar. Cartridges are chemically compatible with most ultra-pure chemicals, solvents & sanitizing agents. Absolute Filtration Ratings: 99.98% (ßx=5000) removal efficiencies.		Dimensions: Length: 10 to 40 inches (25.4 to 101.6 cm) nominal Outside Diameter: 2.70 inches (7.0 cm) nominal Filter Area: 7,5 ft2 per 10” Maximum Recommended Operating Conditions: Temperature ..................................... 80°C Maximum Differential Pressures: Forward ............................ 3,4 bar at 20°C Reverse ............................ 2,7 bar at 20°C Product Purity: All components FDA acceptable per 21 CFR. All polypropylene components meet the specifications for biological safety per USP Class VI-121 C for plastics.

Ordering Information: (universal ordering code, not all options are available)
PEG	Pore Size	Length	End Cap Code	O-Rings/Gaskets
PEG	0,1 = 0,1μm	1 = 10"	1 = DOE w/ Gaskets	1 = Silicone
PEG	0,2 = 0,2μm	2 = 20”	2 = SOE -222 O-rings with Flat Cap	2 = EPDM
PEG	0,45 = 0,45μm	3 = 30”	3 = SOE -222 O-rings with Fin	3 = Buna
PEG	0,65 = 0,65μm	4 = 40”	4 = SOE -222 O-rings with Spring	4 = Viton
PEG	0,8 = 0,8μm	Y = 5"	5 = SOE -226 O-rings with Spring	5 = Teflon Encapsulated Viton
PEG	-	-	6 = SOE -226 O-rings with Flat Cap	6 = Polyfoam End Gaskets
PEG	-	-	7 = SOE -226 O-rings with Fin	-
PEG	-	-	8 = SOE with Spring	-
PEG	-	-	9 = SOE with Core Extender	-