INTERNORMEN Cartridge Filters

Microfiberglass Pleated Cartridges, excellent flow rates, high dirt-loading capacity, suitable for both liquids & gases, with an exceptional ability to retain deformable & non-deformable particles. To be used for wine clarification, aromatic hydrocarbons, corn syrup, membrane prefiltration & in several other industries. Pleated Microfiberglass Cartridges offer an economical, absolute rated, filtration solution for both liquids and gases, designed to hold 0,5 m2 of filtration media.They offer excellent flow rates and long service life with an exceptional ability to retain both deformable and non-deformable particles. High Purity GFP-Cartridges are constructed with absolute rated borosilicate microfiberglass media that offers high dirt-loading capacities. The natural positive charge of the glass fiber also aids in the retention of negatively charged particulates such as bacteria, endotoxin, and a variety of colloidal materials.

Download Technical Information (PDF)

Typical Applications: Membrane Prefiltration Sterile Air Corn Syrup R.O. Prefiltration	Wine Clairfication Aromatic Hydrocarbons Oilfield Completion Fluids
Construction Materials: Filtration Media ............... FDA Borosilicate Microfiberglass with acrylic binder. Support Media ...... Spun-bonded polyester laminated on upstream & downstream sides. End Caps ............................ Polypropylene Center Core ........................ Polypropylene Outer Support Cage ............ Polypropylene O-rings/Gaskets .... Silicone, EPDM, Buna, Viton, Teflon Encapsulated Viton, Polyfoam Sanitisation/Sterilisation: Filtered Hot Water 90°C for 30 minutes at maximum of 1 bar Absolute Filtration Ratings: 99.98% (ßx=5000) removal efficiencies.		Dimensions: Length: 10 to 40 inches (25.4 to 101.6 cm) nominal Outside Diameter: 2.70 inches (7.0 cm) nominal Filter Area: 0,5 m2 per 10” Maximum Recommended Operating Conditions: Change Out .............................. ∆P 2,4 bar Temperature ..................................... 93°C Optional Stainless Construction .... 135°C Product Purity: All components FDA acceptable per 21 CFR. All polypropylene components meet the specifications for biological safety per USP Class VI-121 C for plastics.

Ordering Information: (universal ordering code, not all options are available)
GFP	Pore Size	Length	End Cap Code	O-Rings/Gaskets
GFP	0,45 = 0,45μm	1 = 10"	1 = DOE w/ Gaskets	1 = Silicone
GFP	1 = 1,0μm	2 = 20”	2 = SOE -222 O-rings with Flat Cap	2 = EPDM
GFP	2 = 2,0μm	3 = 30”	3 = SOE -222 O-rings with Fin	3 = Buna
GFP	5 = 5,0μm	4 = 40”	4 = SOE -222 O-rings with Spring	4 = Viton
GFP	10 = 10,0μm	Y = 5”	5 = SOE -226 O-rings with Spring	5 = Teflon Encapsulated Viton
GFP	20 = 20,0μm	-	6 = SOE -226 O-rings with Flat Cap	6 = Polyfoam End Gaskets
GFP	40 = 40,0μm	-	7 = SOE -226 O-rings with Fin	-
GFP	-	-	8 = SOE with Spring	-
GFP	-	-	9 = SOE with Core Extender	-